Fluke Digital Multimeters

Service Details:

Fluke MS2-100 Micro Scanner Cable Tester Next-generation MicroScanner verifies voice/data/video cable and services with a revolutionary user interface.

Other Detail:

Revolutionary Interface – graphical wiremap, length, cable ID, and distance to fault displayed on one screen

Multimedia Support – tests all common media types including RJ11, RJ45, Coax, with no need for adapters

IntelliTone Toning – trace virtually any cable or wire pair with IntelliTone digital and analog toning

VDV Service Detection – verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE

Rugged Housing – integrated rubber holster enhances grip and makes it durable enough for the toughest jobs

Oversized Display – large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark close

Features:

Yesterday’s cable verification testers force users to toggle between up to four different modes of operation to view all test results. This not only slows the test process, but also causes frustration and leads to high user error rates. MicroScanner2 has defeated this convention by displaying key test results – wiremap, pair lengths, distance to fault, cable ID, and far end device – all on one screen. Plus it features an oversized, backlit LCD screen with the power to display wiremap results graphically, which brings unprecedented comfort and clarity to the user experience.

 
Intellitone Toning:

MicroScanner2 features built-in IntelliTone digital and analog toning to precisely locate virtually any cable or wire pair, regardless of work environment. Use digital mode to locate high-grade data cabling (Cat 5e/6/6a) in bundles, or at switches, patch panels, or wall outlets. Digital mode especially performs in environments with high data, RF, or electromagnetic interference. When coupled with the IntelliTone 200 Pro Probe, it can also be used to verify cable wiremap from either the tester end or the probe end.

Use analog mode on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring. These cables are optimized for lower frequency transmissions, and therefore are more easily isolated with a low-frequency tone. MicroScanner2’s smart analog tone eliminates frustrating guesswork locating individual wire pairs during installations by changing songs each time the pair under test is shorted together. This provides technicians a decisive way to identify individual wire pairs before punching them down or when diagnosing voice transmission problems.

 

Service Details:

Description:

• The Fluke 101 Digital Multimeter offers reliable measurements for residential/ commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come.

Key Features:

• Basic dc accuracy 0.5 %
• CAT III 600 V safety rated
• Diode and continuity test with buzzer
• Small lightweight design for one-handed use
• Rugged, durable design
• Automatic shutdown
• Battery is easy to replace

Service Details:

Description:

• The Fluke 106 digital multimeter is made to fit the way you work! It is designed to fit in the palm of your hand and go with you no matter where your job takes you .

Key Features: 

• CAT III 600 V Safety Rated
• AC/DC current , AC/DC Voltage , Resistance , Capacitance , Frequency Measurement
• Diode and Continuity test with Buzzer 
• Large Easy to read Backlit Display
• Small Lightweight Design - Easy carrying in Pocket
• Rugged , Reliable , Accurate Readings
• Long Battery Life with Auto Power OFF 

 

Service Details:

Description:

The Fluke 107 digital multimeter is made to fit the way you work! It is designed to fit in the palm of your hand and go with you no matter where your job takes you .

Key Features:

• CAT III 600 V Safety Rated
• AC/DC current , AC/DC Voltage , Resistance , Capacitance , Frequency Measurement
• Diode and Continuity test with Buzzer
• Large Easy to read Backlit Display
• Small Lightweight Design - Easy carrying in Pocket
• Rugged , Reliable , Accurate Readings
• Long Battery Life with Auto Power OFF

Special Specifications:

• Maximum Voltage between any terminal and Earth Ground : 600 V
• IP Rating : IEC 60529 : IP40
• Duty Cycle : 0.1% to 99.9 %
• Diode Test : 2 V
• With Backlight
  
  

Product Specifications:

• SKUME.EL.DI.191489
• Model No.Fluke 107
• TypePalm-sized Digital Multimeter
• DisplayLCD Display
• Counts6000 Counts
• SensingAverage
• Frequency Range (Hz)50Hz - 100 kHz
• Frequency Accuracy±0.1 % + 3
• Operating Temperature0° to 40°C
• Storage Temperature-30° to 60°C
• Power InputNEDA 24A, IEC LR03 AAA x 2 Batteries
• Dimension142x69x28 mm
• Weight (gms)200 g
• Standard accessoriesTL75 Test leads , 2 AAA Batteries (installed) , User’s manual
 

Service Details:

Features:

• Built-in thermometer for HVAC applications
• Microamps to test flame sensors
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak)
• CAT III 600 V safety rated.

 

 

Service Details:

Features:

• VoltAlert technology for non-contact voltage detection
• AutoVolt automatic ac/dc voltage selection
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True-rms for accurate measurements on non-linear loads
• Measures 10 A (20 A overload for 30-seconds)
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak) for hands free operation
• CAT III 600 V safety rated.

 

Service Details:

Features:

• New IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
• Designed to withstand 3 meter drop (with holster)
• Average responding voltage and current for measurements
• New Backlit keypad buttons allow for easy visibility in lowlit areas
• Large display digits and 2 level bright white backlight for increased visibility
• Reversible holster for added protection when not in use
• Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
• Long battery life (800 hours)
• Relative mode to remove test lead resistance from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
• MSHA approval.

Service Details:

Features:

• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument 
• Min/Max and average recording to capture variations automatically
• Peak min-max
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
• New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
• Designed to withstand 3 meter drop (with holster)
• High resolution 20,000 count display mode
• True-rms ac voltage and current for accurate measurements on non linear signals
• New – Backlit keypad buttons allow for easy visibility in lowlit areas
• Large display digits and 2 level bright white backlight for increased visibility
• Reversible holster for added protection when not in use
• Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
• Long battery life (800 hours)
• Relative mode to remove test lead resistance from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
• MSHA approval.

Service Details:

Features:

• Intrinsic safety plus regulatory approvals
• A completely sealed, IP67 rated case
• Withstands drops up to 10 feet or 3 meters (with holster)
• Dustproof per IEC60529 IP6x
• Waterproof per IEC60529 IPx7
• Meets IEC Overvoltage Electrical Safety Standard No. 61010-1:2001
• Reversible holster for added protection of the display when not in use
• 4-1/2 digit mode for precise measurements (20,000 counts)
• True-rms ac voltage and current for accurate measurement on nonlinear signals
• Measures up to 1000V and 10A ac and dc (note that Ex zones require reduced measurements)
• Low pass filter ensures accurate voltage and frequency measurements on variable speed motor drives (VSDs)
• Frequency to 200 kHz and % duty cycle to help you diagnose VSDs and switching power supplies
• Resistance, continuity and diode test
• 10,000 µF capacitance range for components and motor caps
• Conductance measurements for high resistance or leakage tests
• Min/Max-Average and Peak capture to record transients and variations automatically
• Relative mode to remove test lead interference on resistance measurements
• Auto and manual ranging for maximum flexibility
• Input Alert protects you by chirping and flashing “Lead when leads are plugged into the wrong inputs
• Backlit keypad buttons provide extra visibility in poorly lit areas, even when you’re wearing full PPE
• Large display digits and 2-level bright white backlight also increases visibility
• Long battery life – 400 hours typical without backlight (Alkaline)
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks

Service Details:

Features:

• Large display
• Backlight for work in dim areas
• Min / Max to record signal fluctuations
• Ergonomic overmolded housing with integrated probe holders
• Free your hands with the optional TPAK magnetic hanger
• Auto and Manual ranging
• Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards.

Service Details:

Other Detail:

• Digital multimeter measures AC/DC voltage, current, frequency, resistance, and capacitance, and performs continuity and diode tests
• Average-responding, RMS-indicating meter provides correct readings for linear loads such as induction motors, resistive heaters, and incandescent lights
• Min./Max. average recording with Min./Max. alert to capture variations automatically
• Analog bar graph for fast changing or unstable signals
• Safety rated for Category III to 1,000V and Category IV to 600V
• Auto and manual ranging for maximum flexibility
• Analog bar graph for fast changing or unstable signals
• Measure up to 10 A, 20 A for up to 30 seconds

Service Details:

The Fluke 87 V Digital Multimeter is a versatile True-RMS meter that's perfect for professional or around-the-house use. This meter offers auto and manual ranging for maximum flexibility, and it also offers an annual bar graph for quick-changing or unstable signals. Classically designed, the Fluke 87-V has a removable holster with built-in probe and test-lead storage. For added convenience, it arrives ready to go with TL75 test leads and a nine-volt battery.

Safe, Convenient Functions Enable Productivity:

• Designed for maximum productivity, the Fluke 87-V has more problem solving power, safety, convenience, and impact protection than the previous 80 Series models. This multimeter offers improved measurement functions, accuracy, and resolution, as well as trouble-shooting features to solve problems with motor drives, in-plant automation, power distribution, and electro-mechanical equipment.

Auto and Manual Ranging for Versatility

• This unique multimeter provides both auto and manual ranging for optimum flexibility. And it's chock-full of helpful functions for accurate voltage and frequency measurements, even on adjustable-speed motor drives and other noisy equipment. 

Service Details:

Fluke 170 Series digital multimeters give you True RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements.

 

Service Details:

Features:

• True RMS voltage and current measurements
• 0.09% basic accuracy 
• 6000 count resolution
• Digital display with analog bargraph and backlight
• Manual and automatic ranging
• Display Hold and Auto Hold
• Frequency and capacitance measurements
• Resistance, continuity and diode measurements
• Min-max-average recording
• Smoothing mode allows filtering of rapidly changing inputs
• Easy battery exchange without opening the case
• Closed case calibration through front panel
• Ergonomic case with integrated protective holster
• EN61010-1 CAT III 1000V / CAT IV 600V
• Measures twice as fast as other multimeters.

Service Details:

Product Description:

• The Fluke 179 Digital Multimeter is the top of the line offering in the popular Fluke 170 series. The overmolded case with built in probe holders also adds the protection to withstand a drop test up to one meter. Add to that the lifetime warranty and you get one of the most durable, cost effective tools in your arsenal. Smart, Safe, & Tough! The Fluke 179 is a proven tough multimeter that has a lifetime warranty. It is rough and tough and can take a hit. The 179 has a built in molded holster that gives the unit increased ruggedness. The 179 features tougher body armor, 6000 count resolution display, auto and manual hold, lifetime warranty and are designed to meet the IEC 1010 Safety Standards to CAT IV 600V and CAT III 1000V. These meters are internally tough with fused current inputs, overvoltage protection and they even protect against measuring voltage if the knob is accidentally set on ohms. On the outside the rugged overmolded body armor case offers constant protection no matter how much you throw them around. For those with accuracy concerns the Fluke 170 series meters are more accurate than ever and have an easy-open battery door where the battery can be changed without breaking the calibration seal, preventing unnecessary calibration charges. For overvoltage protection against transient spikes up to 6 kV, and has the safety ratings to prove it. Protect yourself and your technicians working in dangerous environments like three-phase distribution systems such as: single phase commercial lighting, equipment in fixed installations like switch gear and polyphase motors, bus and feeder in industrial plants, lighting systems in larger buildings and appliance outlets with short connections to the service entrance.

Product Features:

• Trms Multimeter W/backlight And Temp (Eng, Sp, Fr, Por)
• Nist Calibration
• Bright Backlight Display To See The Screen In Almost Any Light
• Comes With The 80bk Temp Probe
• Measures Temp In F And C

Additional Information:

• Item Code: 179
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P

Service Details:

Now compatible with Fluke Connect® Mobile App
The Fluke 287 True-RMS Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend. The Fluke 287 packs more accuracy and convenience into a handheld multimeter than ever before.

Service Details:

FLUKE-15B Digital Multimeters