HP Networking

Service Details:

The HP V142 Rack is full feature, low cost alternative for emerging markets and data center startups. It is fully compatible with all HP rack mounted products including ProLiant, Integrity, Nonstop, HP 9000 and Alpha servers as well as Storage products. This product expands the HP rack product line by offering a value line rack The HP V142 Rack also offers many improvements over the HP Rack 5000 Series racks: Front door with updated design Front and rear door handles and locks for security Side panels come in 2 parts for ease of manageability and mounting Cable management accessory compatible New rack stabilizer, baying, grounding kit Three year limited warranty, parts only (3/0/0) 

Additional Information:

• Item Code: AF040A
• Production Capacity: 5
• Delivery Time: 2-3 Days
• Packaging Details: As per Customer Demand

Service Details:

The HPE 42U Standard Pallet Rack is a full-featured, low cost rack option for HPE server and storage customers buying their first IT rack. It is fully compatible with all HPE rack-mounted servers, storage, and networking products, but recommended for those devices requiring less than 1075mm of depth. The HPE 42U Standard Pallet Rack is designed to meet the EIA-310D industry specification and can be used with most other non-HPE 19-inch wide devices. The HPE 42U 600mm x 1075mm Standard Pallet Rack includes: • Front door with perforated design for better air flow • Front and rear door handles and locks for security • Cable management, rack stabilizer, baying, grounding kit and other options available • Three-year limited warranty (3/0/0), parts only • Covered by HPE Server Care Pack when server and rack purchased together • Optional side panels come in 2 parts for ease of manageability and mounting

Service Details:

HP Basic PDUs provide effective power distribution, supporting from 12 to 42 outlet receptacles and power levels ranging from 1.9 kVA to 19.9 kVA. The low-profile single piece design on these PDUs provides ease of access to rear devices for maintenance consideration and multiple mounting options. They are designed for HP racks but will work in a large variety of third-party racks as well. They can be installed on either side of the rack with outlets facing the back for easy access and improved clearance. In addition, for higher power density they can be installed side by side on both sides of the rack with the outlets facing in toward the center of the rack.  

Service Details:

• HPE FlexNetwork 5130 24G PoE+ 4SFP+ 1-slot HI Switch
• 24 RJ-45 autosensing 10/100/1000 PoE+ ports
• 4 fixed Gigabit Ethernet SFP+ ports(min=0 \ max=4 SFP/SFP+ Transceivers)
• 1 port expansion module slots
• Must select min 1 power supply 1U - Height

Service Details:

HPE FlexNetwork 5130 48G 4SFP+ 1-slot HI Switch JH324A:
• 48 RJ-45 autosensing 10/100/1000 ports
• 4 fixed Gigabit Ethernet SFP+ ports
• (min=0 \ max=4 SFP/SFP+ Transceivers)
• 1 port expansion module slots
• Must select min 1 power supply
• 1U - Height

Service Details:

• 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100
• BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASET/100
• BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ fixed 1000/10000 SFP+ ports

Service Details:

• 16 SFP 100/1000 Mbps ports 8 SFP dual-personality ports- 10/100/1000BASE-T RJ-45 or 100/1000
• BASE-X Combo Ports 4 SFP+ fixed 1000/10000 SFP+ ports

Service Details:

• 48 RJ-45 autosensing 10/100/1000 ports
• 4 dual-personality ports; autosensing 10/100/1000Base-T or SFP
• min=0 \ max=4 SFP Transceivers
• 2 port expansion module slots
• Power Supply included
• 1U - Height

Service Details:

Key features • Scalable with 10 Gigabit uplinks and 9-chassis IRF with up to 160 GB/s stacking bandwidth • 40G QSFP+ ports for uplink or stacking • 4 convenient built-in SFP+ 10GbE uplinks provide performance for bandwidth hungry applications • PoE+ for up to 30 Watts of PoE power per port on all ports simultaneously • MACsec support

HPE FlexNetwork 5510 HI Switch Series The HPE FlexNetwork 5510 HI Switch Series comprises Gigabit Ethernet switches that deliver resiliency, security, and multiservice support capabilities at the edge layer of data center, large campus, and metro Ethernet networks. With Intelligent Resilient Fabric (IRF) support and available dual power supplies, the HPE FlexNetwork 5510 HI Series Switch can deliver high levels of resiliency and manageability. In addition, the PoE+ models provide up to 1440 W of PoE+ power with the dual power supply configuration. Designed with four fixed 10GbE ports and supports additional modular uplinks, these switches can provide up to six 10GbE uplink ports. With complete IPv4/IPv6, OpenFlow, and MPLS/VPLS features, the series provides investment protection with an easy transition from IPv4 to IPv6 networks.

Additional Information:

• Production Capacity: 20
• Delivery Time: 1-2 Days

Service Details:

• 20 Autosensing 10/100/1000 ports (IEEE 802.3
• Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab
• Type 1000Base-T IEEE 802.3at PoE+);
• Duplex: 10BASE???T/100BASE-TX:half or full;1000BASE-T:full only
• 4 Combo 10/100/1000BASE-T PoE+ or 100/1000Mbps SFP Ports

Service Details:

• 44 Autosensing 10/100/1000 ports (IEEE 802.3
• Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab
• Type 1000Base-T, IEEE 802.3at PoE+);
• Duplex: 10BASE???T/100BASE-TX:half or full;1000BASE-T:full only
• 4 Combo 10/100/1000BASE-T PoE+ or 100/1000Mbps SFP Ports

Service Details:

HPE FlexNetwork 5130 48G PoE+ 4SFP+ 1-slot HI Switch
• 48 RJ-45 autosensing 10/100/1000 PoE+ ports
• 4 fixed Gigabit Ethernet SFP+ ports
• (min=0 \ max=4 SFP/SFP+ Transceivers)
• 1 port expansion module slots
• Must select min 1 power supply
• 1U - Height

Service Details:

Description:

• Economical and straight forward remote pdu current monitoring. this pdu incorporates a stand-alone web server that offers visual feedback of the pdu current draw as well as snmp integration for automated monitoring via a bms/nms platform.

Features:

• Remote monitoring of aggregate pdu current draw
• User defined warning and alarm
• Snmp enabled inbuilt snmp mib
• Xml data output for use with sql database platforms/billing
• Local digital display
• 1 x rj45 network port
• Supports protocols http/ dhcp tcp/ip ntp telnet
• Supports data formats: html snmp xml
• Equivalent to apc part ap7853

Service Details:

• 24 fixed Gigabit Ethernet SFP ports
• (Of the 24, 8 are dual-personality ports; autosensing 10/100/1000Base-T or SFP)
• min=0 \ max=2432 SFP Transceivers
• 2 - port expansion module slots
• 1 - JD362A - HP 5500 150WAC Power Supply Included
• 1U - Height

Additional Information:

• Production Capacity: 50
• Delivery Time: 2.-3 Days
• Packaging Details: As per Customer Demand

Service Details:

7.3kVA 230 Volt 20 Outlet INTL Basic Power Distribution Units
HP Basic PDUs are designed for simple installation, reliability and cost effective power distribution. They come in a variety of form factors and outlet configurations to meet the needs of today’s high-density data center rack environments.

With effective power distribution supporting from 12 to 42 outlet receptacles and power levels ranging from 1.9 kVA through 19.9 kVA, HP has the Basic single or 3-phase PDU for any application. The low profile single piece design on these PDU’s provides ease of access to rear devices for maintenance consideration and provides multiple mounting options. They are designed for HP racks but will also work in a large variety of third party racks.

They can be installed on either side of the rack with outlets facing the back of the rack for easy access and improved clearance. For higher power density they can be installed side by side on both sides of the rack with the outlets facing in towards the center of the rack.

Additional Information:

• Item Code: HPH5M68A